Product Description & Application
JiuguangBacklit Front Print PET 150micron is a polyester backlit, one side
is coated with a translucent matte ink-receptive layer for inkjet
printing and the other side is gloss. It is suitable for outdoor
and indoor static backlit applications,such as light boxes at
retail outlets, shopping malls, indoor stadiums, airports, subway,
multiplexes,hotels & restaurants.
It is recommended to acclimatise the media in the normal printing
environment for 24 hours before printing.
While printing, care must be taken to modify the print file to suit
the ink limit of the media. For best results, please ensure proper
colour calibration. For further assistance, please consult our
The media should be printed on within the specified ink limit.
Exceeding the ink limit can lead to longer drying time, bleeding,
lower resolution and poor adhesion of the lamination media.
Printed media should be protected by a cold, UV stabilised,
pressure sensitive adhesive laminate only. The prints should be
thoroughly dried before lamination. The lamination media must be
checked for compatibility with the media.
Printed media should be thoroughly dried before rolling-up for
transport to avoid ink smearing.
The inherent nature of the polyester calls for careful handling of
the media to avoid fold and kink marks.
A fresh pair of cotton gloves should be used while handling the
bare media to avoid sweat, grease and oil transfer on to the media
that could interfere with the print quality.
When not in use, the media should be stored in its original packing
in a vertical position.